Hi,
Thank you for your continued help with this. Cellular still not working, but the plot thickens.
I actually have TWO Spitz Plus GLX 2000 devices.
One in downtown Boston (lots of local cell towers and carriers), the other Northern NH. In my setting the Boston site is REMOTE, and the NH site is LOCAL. Each Spitz Plus has their own GoogleFi Sim card, both SIM cards are active on the same Goggle Fi account
Each site WAN1 is cable modem. Boston Xfinity, NH Spectrum,
Boston Cellular seems to be T Mobile and NH also seem to be T Mobile
-
NH Cellular SIM registered and IP address obtained. Always using “automagic” settings. Still working (for months and still active today) and can see APN as fast.metropcs.com and IPv4&IPv6.
-
Boston Cellular initially automagically connected/registered SIM and obtained IP for several months. However, after WAN outage this week, failure of cellular fail over, and IPv6 error messages in log, I manually forced cellular configuration to IPv4 and Boston celllular has never properly connected since (logs attached).
I have tried Boston manual cellular with h2g2 with IPv4 h2g2 IPv4&6 and fast.metropcs.com with IPv4 and IPv4&6
I now get SIM not registered but also, The interface is connected, but the Internet can't be accessed.
Boston Cellular is Broken but NH cellular is working with fast.metropcs.com and IPv4&6. Boston cellular no longer gets IP with any settings I have tried.
See attached log file
On a side note, I see a post above GL.iNet GL-X3000 won't connect to T-Mobile Home Internet - #30 by domc43 maybe related?
Thanks again for you help