VPN Issue after upgrading Beryl to v5.4.211

Technical Support for Routers VPN, DNS, Leaks
1

Im using a Beryl Router in a remote location with Wireguard VPN activated. I recently updated the firmware to 5.4.211 and now my vpn doesn’t connect. please help

Mon Apr 15 14:50:49 2024 daemon.notice netifd: wgclient (13595): * Rule ‘out_conn_mark_restore’
Mon Apr 15 14:50:49 2024 daemon.notice netifd: wgclient (13595): * Zone ‘lan’
Mon Apr 15 14:50:49 2024 daemon.notice netifd: wgclient (13595): * Zone ‘wan’
Mon Apr 15 14:50:49 2024 daemon.notice netifd: wgclient (13595): * Zone ‘guest’
Mon Apr 15 14:50:49 2024 daemon.notice netifd: wgclient (13595): * Zone ‘wgclient’
Mon Apr 15 14:50:49 2024 daemon.notice netifd: wgclient (13595): * Set tcp_ecn to off
Mon Apr 15 14:50:49 2024 daemon.notice netifd: wgclient (13595): * Set tcp_syncookies to on
Mon Apr 15 14:50:49 2024 daemon.notice netifd: wgclient (13595): * Set tcp_window_scaling to on
Mon Apr 15 14:50:49 2024 daemon.notice netifd: wgclient (13595): * Running script ‘/etc/firewall.nat6’
Mon Apr 15 14:50:49 2024 daemon.notice netifd: wgclient (13595): * Running script ‘/etc/firewall.swap_wan_in_conn_mark.sh’
Mon Apr 15 14:50:49 2024 daemon.notice netifd: wgclient (13595): * Running script ‘/var/etc/gls2s.include’
Mon Apr 15 14:50:49 2024 daemon.notice netifd: wgclient (13595): ! Skipping due to path error: No such file or directory
Mon Apr 15 14:50:49 2024 daemon.notice netifd: wgclient (13595): * Running script ‘/usr/bin/gl_block.sh’
Mon Apr 15 14:50:49 2024 daemon.notice netifd: wgclient (13595): * Running script ‘/etc/firewall.vpn_server_policy.sh’
Mon Apr 15 14:50:49 2024 daemon.notice netifd: wgclient (13595): Failed to parse json data: unexpected character
Mon Apr 15 14:50:49 2024 daemon.notice netifd: wgclient (13595): uci: Entry not found
Mon Apr 15 14:50:49 2024 daemon.notice netifd: wgclient (13595): cat: can’t open ‘/tmp/run/wg_resolved_ip’: No such file or directory
Mon Apr 15 14:50:49 2024 daemon.notice netifd: Interface ‘wgclient’ is now down
Mon Apr 15 14:50:49 2024 daemon.notice netifd: Interface ‘wgclient’ is setting up now
Mon Apr 15 14:50:49 2024 user.notice firewall: Reloading firewall due to ifdown of wgclient ()

2

Unfortunately it’s not possible to debug WireGuard problems by reading the logs. The logs are mostly OK.

You need to troubleshoot the issue on server side. Check if the config still exits and all ports are open.

3

Can you re-check the firmware version? Not sure if there is a version 5.4.211