bruce
April 3, 2025, 7:06am
2
Hello,
Adding wireless radio manually on Luci may cause incomplete parameter in the configuration file, and cause wireless radio to fail to boot properly.
Please SSH to router, in /etc/config/wireless, add 'option ifname ' in the 'config wifi-iface':
If feel difficult to edit configuration file, it is suggested to reset the firmware first, and refer to point 3 of this post to add the radios with one click using the uci commands:
GL GUI -> Network -> Guest network, here can change the subnet IP. The 'br-guest' is hard code.
[image]
It's not sense and cannot feasible, unless manually custom add a route rule.
Add new SSID WiFi for MT6000 (v4.8.3, stable), on the SSH:
#Notes:
#1. Add 2 new subnets: "br-iot" and "br-custom", with isolation between br-lan.
#2. Add separate 2.4 GHz and 5 GHz Wi‑Fi radios for the "iot" and "custom" network.
#3. The "From-Specified Connection Types" in the VPN policy mode, support d…
