750m travel ac router - mac clone dont work

[yuxin.zou]

@bob2022

1. Do I understand correctly that I can only see all gl packages via http ? HTTPS not working for us?
2. gl packages such as gl-sdk4-macclone are only in your repository and you don’t place them in the OpenWrt repositories?

Only some gl- packages are available in our repository, not in the OpenWrt repository. You can download them from the opkg using https.

src/gz glinet_private https://fw.gl-inet.com/releases/v19.07.8/packages-3.0/ath79/glinet

@bob2022

There are two options to build your own GL-image, this one How to compile firmware for AXT1800 and the second option is to install OpenWrt and only then install the programs I need, right?

Please refer to

Clean firmware build for AXT1800?

You can add the required packages by modifying the profile. Before running make -j17, add the feed you need to the gl-infra-builder/feed/glinet directory, and then add it to the packages entry in profiles/luci.yml For example, to add helloworld as an example in the gl-infra-builder/feed/glinet directory, you need to change profiles/luci.yml to --- description: Add the LUCI dependencies feeds: - name: glinet path: ../feeds_dir/glinet packages: - luci - luci-base - luci-mod-rpc …

However, this compilation tool is not available for 3.x.

@bob2022

I also saw this guide GitHub - gl-inet/imagebuilder: Warning！Please look at ‘GL.iNET Imagebuilder Introduction’ section.

Yes, this is also the compilation tool, which is available for 3.x.