Aircove AX1800 to GL-AX1800 Flint Firmware

[carvacs]

I was testing the ExpressVPN firmware for the GL-AX1800 Flint so I converted it to a Aircove AX1800. Now I want to go back to the original GL-AX1800 Flint Firmware. From the ExpressVPN firmware menu I can do a manual firmware update, but it won’t accept the file. I also tried the Uboot, but the reset sequence does not work.

[wcs2228]

Try this procedure:

Uboot on AX1800 does not work!

There is two ways of doing this. Serial: With Serial UART connected (Your going to need to solder headers) power on the device When the prompt comes up with press xv, press xv this will put you in a uboot shell In That uboot shell type httpd 192.168.132.1 Now in a web browser type http://192.168.132.1/uboot.html Now Download and Flash this file UBOOT Then Repeat the first 3 steps then open browser to `http://192.168.132.1’ and flash gl-inet firmware Reset Pin Method: With device powered…

I do not work for and I do not have formal association with GL.iNet .

[vvv]

How did you like the Aircove firmware?

[pnwuser]

How did you get the AirCove firmware? Was it easy to install and covert Flint to AirCove?

[K3rn3l_Ku5h]

How to Update ExpressVPN on Your Router | ExpressVPN

Version 1 was downloadable but has been discountinued
Versoin 2 and up you need to have a Express vpn account

[karimko]

i have the latest expressvpn aircove firmware, if anyone interested let me know