Fan nor running GL-AXT1800

[Johnex]

Also check the following thread for even more info and how to control the fan:

I found a way to set the gl fan!

NVM found how to do it. If you stop the gl_fan service completely, you can control the fan manually: /etc/init.d/gl_fan stop echo 255 > /sys/class/thermal/cooling_device0/cur_state The value is from 0 to 255. Even changing the temperature in gl_fan, if you don’t stop the service, the service will change the fan speed down 0. So until the gl_fan service is improved, i would just say put it at max. It’s not very loud from 2m away where i’m sitting. My router is sitting happy at 56 deg now co…