@alzhao on the fw v. 3.105 guest IP tab is present on Brume-w
Tried 3.203 (0702 and 0703 snapshot, and beta6) on my MT1300 - all three builds fail to work with WiFi. No AP is created on boot, WiFi scanning (for repeater mode) doesn’t return anything, WiFi channel optimisation also fails.
Yes I confirm the last two builds are not working with MT1300
1 Like
We have just found this problem. The WiFi driver has been adjusted and it is not compatible. I have deleted the version of MT1300 3.203_BETA4.
The issue is also present in the 0701, 0702 and 0703 snapshot versions, I’d recommend you delete those too.
Also, is there any chance we could get changelogs for the snapshot versions too, not just the betas? Would be nice to know what changed, even if it’s just a git merge history (e.g. a list of updated dependencies/firmwares)
1 Like
Hello!
Yes that’s was a requirement I did also like you but…
Bye!
Tab ‘Guest IP’ in Lan IP not working (B1300)
Brume-w which folders and files in /etc i’m need rm before upgrade to 3.203_beta4
rm /etc/AdGuardHome/AdGuardHome - done
and what else? I’m install only luci and configure s2s from GoodCloud
ll /etc
root@brume-w1:/etc# ll
drwxrwxr-x 1 root root 3488 Jul 9 07:37 ./
drwxr-xr-x 1 root root 3488 Jul 1 15:13 …/
drwxr-xr-x 1 root root 3488 Jul 9 00:25 AdGuardHome/
lrwxrwxrwx 1 root root 7 Jul 1 15:12 TZ → /tmp/TZ
-rw-rw-r-- 1 root root 397 Feb 15 20:22 banner
-rw-rw-r-- 1 root root 461 Feb 15 20:22 banner.failsafe
drwxrwxr-x 2 root root 74 Jul 1 15:12 board.d/
-rw-r–r-- 1 root root 216 Jul 1 15:12 board.json
drwxr-xr-x 2 root root 87 Jul 1 15:12 chatscripts/
drwxrwxr-x 1 root root 3488 Jul 9 07:44 config/
drwxr-xr-x 2 root root 3 Feb 15 20:22 crontabs/
drwxr-xr-x 2 root root 52 Jul 1 15:12 ddns/
-rw-rw-r-- 1 root root 123 Feb 15 20:22 device_info
-rw-rw-r-- 1 root root 736 Feb 15 20:22 diag.sh
-rw------- 1 root root 1368 Feb 15 20:22 dnsmasq.conf
drwx------ 1 root root 3488 Jul 1 15:13 dropbear/
-rw-r–r-- 1 root root 38 Feb 15 20:22 e2fsck.conf
-rw-rw-r-- 1 root root 130 Feb 15 20:22 ethers
-rw-r–r-- 1 root root 1362 Feb 15 20:22 ethertypes
-rw-rw-r-- 1 root root 8 Jul 1 15:12 filesystems
-rwxr-xr-x 1 root root 4374 Feb 15 20:22 firewall.nat6*
-rw------- 1 root root 2372 Jul 1 15:12 firewall.user
-rwxrwxr-x 1 root root 1006 Jul 1 15:12 forward*
-rw-rw-r-- 1 root root 61 Feb 15 20:22 fstab
-rw-r–r-- 1 root root 30 Jul 1 15:12 fw_env.config
drwxr-xr-x 2 root root 344 Jul 1 15:12 gcom/
-rw-rw-r-- 1 root root 6 Jul 1 15:12 glversion
-rw-rw-r-- 1 root root 192 Jul 1 15:12 group
-rw-rw-r-- 1 root root 110 Feb 15 20:22 hosts
-rw------- 1 root root 305 Feb 15 20:22 hotplug-preinit.json
drwxr-xr-x 15 root root 181 Jul 1 15:12 hotplug.d/
-rw------- 1 root root 1430 Feb 15 20:22 hotplug.json
drwxrwxr-x 1 root root 3488 Jul 9 07:37 init.d/
-rw-rw-r-- 1 root root 106 Feb 15 20:22 inittab
drwxrwxr-x 2 root root 40 Jul 1 15:12 ip-up.d/
drwxrwxr-x 2 root root 79 Jul 1 15:12 iproute2/
drwxr-xr-x 1 root root 3488 Jul 9 00:22 lighttpd/
lrwxrwxrwx 1 root root 14 Jul 1 15:12 localtime → /tmp/localtime
drwxrwsr-x 2 root root 3488 Jul 1 15:13 lockdown/
drwxrwxr-x 2 root root 3488 Jul 9 07:37 luci-uploads/
drwxr-xr-x 2 root root 383 Jul 1 15:12 modules-boot.d/
drwxr-xr-x 2 root root 1741 Jul 1 15:12 modules.d/
lrwxrwxrwx 1 root root 12 Jul 1 15:12 mtab → /proc/mounts
-rw-rw-r-- 1 root root 727 Feb 15 20:22 mwan3.user
drwxr-xr-x 3 root root 29 Jul 1 15:12 nodogsplash/
drwxr-xr-x 3 root root 53 Jul 1 15:12 openvpn/
-rw-r–r-- 1 root root 372 Feb 15 20:22 openvpn.user
-rw-rw-r-- 1 root root 233 Feb 15 20:22 openwrt_release
-rw-rw-r-- 1 root root 18 Feb 15 20:22 openwrt_version
drwxrwxr-x 2 root root 61 Jul 1 15:12 opkg/
-rw-r–r-- 1 root root 85 Feb 15 20:22 opkg.conf
lrwxrwxrwx 1 root root 21 Jul 1 15:12 os-release → …/usr/lib/os-release
-rw-rw-r-- 1 root root 335 Jul 9 00:23 passwd
-rw-rw-r-- 1 root root 335 Jul 1 15:12 passwd-
drwxr-xr-x 2 root root 103 Jul 1 15:12 ppp/
-rwxrwxr-x 1 root root 609 Feb 15 20:22 preinit*
-rw-rw-r-- 1 root root 1521 Feb 15 20:22 profile
-rw-rw-r-- 1 root root 2541 Feb 15 20:22 protocols
drwxrwxr-x 2 root root 65 Jul 1 15:12 rc.button/
-rwxrwxr-x 1 root root 2504 Feb 15 20:22 rc.common*
drwxr-xr-x 1 root root 3488 Jul 9 07:38 rc.d/
-rw-rw-r-- 1 root root 1026 Jul 1 15:12 rc.local
lrwxrwxrwx 1 root root 16 Jul 1 15:12 resolv.conf → /tmp/resolv.conf
drwxr-xr-x 4 root root 45 Jul 1 15:12 route_policy/
drwxrwxr-x 2 root root 40 Jul 1 15:12 samba/
-rw-rw-r-- 1 root root 3073 Feb 15 20:22 services
-rw------- 1 root root 223 Jul 9 00:23 shadow
-rw------- 1 root root 185 Jul 1 15:12 shadow-
-rw-rw-r-- 1 root root 9 Feb 15 20:22 shells
-rw------- 1 root root 572 Jul 1 15:12 smsd.conf
drwxr-xr-x 4 root root 90 Jul 1 15:12 ssl/
drwxr-xr-x 2 root root 77 Jul 1 15:12 ssmtp/
drwxrwxr-x 2 root root 119 Jul 1 15:12 stubby/
-rw-rw-r-- 1 root root 80 Feb 15 20:22 sysctl.conf
drwxrwxr-x 1 root root 3488 Jul 1 15:13 sysctl.d/
-rw-rw-r-- 1 root root 128 Feb 15 20:22 sysupgrade.conf
drwxr-xr-x 1 root root 3488 Jul 9 09:14 tertf/
drwxrwxr-x 2 root root 28 Jul 1 15:12 tor/
drwxrwxr-x 1 root root 3488 Jul 9 07:37 uci-defaults/
-rw-r–r-- 1 root root 931 Jul 9 07:37 uhttpd.crt
-rw------- 1 root root 1704 Jul 9 07:37 uhttpd.key
-rw------- 1 root root 512 Jul 9 00:22 urandom.seed
-rw-r–r-- 1 root root 53238 Jul 1 15:12 usb-mode.json
-rw-rw-r-- 1 root root 20 Jul 1 15:12 version.date
-rw-r–r-- 1 root root 21 Jul 9 00:22 version.internal
-rwxrwxr-x 1 root root 5523 Jul 1 15:12 vpn.user*
If I flash 3.203_beta4 via uboot, do I need to delete files, folders and rm /etc/AdGuardHome/AdGuardHome?
Hi la3y:
If you want to keep the configuration upgrade,pelease rm /etc/AdGuardHome/AdGuardHome.
If I flash 3.203_beta4 via uboot, do I need to delete files, folders and rm /etc/AdGuardHome/AdGuardHome?
—> Upgrading via uboot does not keep the configuration.You can use Luci to save the configuration locally before upgrading, and then use Luci to restore the configuration once the upgrade is complete.
If I’m want clear install can I’m install from uboot whithout issues? If I’m install from uboot all data and config is lost correct?
Install from uboot will lose all data.
Hey glinet,
I tried the 3.203 (July 03 snapshot) for ap1300lte
qsdk-ap1300-3.203-0703.img
Can you please include following in the plugin list
collectd-mod-sqm
sqm-scripts
sqm-scripts-extra
Let me add to internal dev list
Any ETA on official release date?
Hi, added ipk sqm-scripts-extra & sqm-scripts, but compile collectd-mod-sqm failed. you can try if these two packages work as you need.
1 Like
Hello and thanks hansome,
I uninstalled the old version and tried to install the new version of luci sqm, but installation failed, probably need collectd-mod-sqm too.
The above screenshot is the sqm plugins on my mudi. Can be installed and cake qos works.
Okay, thanks for report that. Newer version of sqm-script depends kmod-sched-cake, but cake qos’s not support by the old 4.4.60 kernel yet. We’ll check it’s possible to add kmod-sched-cake.
Just added kmod-sched-cake, opkg install sqm-scripts will be okay. luci-app-sqm_1.4.0 is not compatible so it’s removed. You can edit /etc/config/sqm to check if it works.
Did already one ore more than one of known bugs or feature requests fixed or realized ?
See the since deleting of gl bug tracker by user held bug and feature list:
- 2021, gl-inet Firmware 3.2, shorttest of snapshot version
- Firmware openwrt-ar750s-3.201-0402.tar, possible still same DNS leak or again
If already one or more are fixed, it can be, one ore more user will spend his time and double check this.
By the way:
- A lower count of known open bugs which are not fixed since month or years, can be possible a good idea for increase the sales. I guess, the customer and shareholder will like it.
1 Like
I am having major problems with my 2 B1300 routers (Mesh) rebooting and losing wifi since the 3.20x betas. Example of log I was able to retrieve at reboot time (20:31:31):
Mon Jul 26 17:02:47 2021 user.notice wireguard: wireguard client start
Mon Jul 26 17:02:47 2021 daemon.emerg procd: cat: can’t open ‘/etc/os-release’: No
such file or directory
Mon Jul 26 17:02:47 2021 daemon.info procd: - init complete -
Mon Jul 26 20:31:31 2021 kern.err kernel: [ 117.519947] wlan: [90:E:ANY] [soc0]
FWLOG: [32065] WAL_DBGID_TX_BA_SETUP ( 0x441254, 0xf3030000, 0x0, 0x4, 0x1)
Mon Jul 26 20:31:31 2021 kern.err kernel: [ 117.519947]
Mon Jul 26 20:31:31 2021 kern.err kernel: [ 117.520017] wlan: [90:E:ANY] [soc0]
FWLOG: [32150] WAL_DBGID_TX_BA_SETUP ( 0x4413cc, 0xa8c00000, 0x0, 0x4, 0x1)
Mon Jul 26 20:31:31 2021 kern.err kernel: [ 117.520017]
Mon Jul 26 20:31:32 2021 authpriv.info dropbear[10007]: Child connection from
192.168.8.229:33668
Mon Jul 26 20:31:33 2021 daemon.info gl_mqtt_service[9383]: mqtt init success!
Mon Jul 26 20:31:34 2021 daemon.info gl_mqtt_service[9383]: Subscribe succeeded
Mon Jul 26 20:31:34 2021 daemon.info gl_mqtt_service[9383]: Subscribe succeeded
Mon Jul 26 20:31:34 2021 authpriv.notice dropbear[10007]: Pubkey auth succeeded for
‘root’ with key md5 62:f8:f1
someone could decipher the problem for me?