Hi I have many times encountered I got power tripped but Flint didn’t manage to connect to internet (PPPoE) and all devices can’t get DHCP from Flint. I need manually set my computer IP address go into the GUI and clicked on the Modify button and Apply.
Seems uboot issue, please refer this guide to upgrade uboot.
I can’t perform UBOOT update it always like this (in my previous post) always taking forever.
how my AX1800 i can’t see/enter into the GUI, but it connected to internet. I"m using 192.168.43.xxx, I key in http://192.168.43.1 nothing come out.
I managed to go in into LUCI, but i can’t perform reboot
PLEASE HELP! I try run uboot again but can’t! What should I do!?
Here is how to flash firmware by uboot.
To flash uboot, the difference is to access the http://192.168.1.1/uboot.html page and upload the uboot binary.
Make sure to compare the md5sum value(see filename) of the downloaded uboot binary for integrity.
Hi all, i still having this issue. When the power tripped my Flint router didn’t manage to connect internet.
Please ssh into flint and use this command to verify the uboot version:
strings /dev/mtd7 |grep "U-Boot 2"