Flint GL-AX1800 Power tripped didn't dial up PPPoE

Technical Support for Routers
1

Hi I have many times encountered I got power tripped but Flint didn’t manage to connect to internet (PPPoE) and all devices can’t get DHCP from Flint. I need manually set my computer IP address go into the GUI and clicked on the Modify button and Apply.

Why??

image

2

Seems uboot issue, please refer this guide to upgrade uboot.

3

I can’t perform UBOOT update it always like this (in my previous post) always taking forever.

how my AX1800 i can’t see/enter into the GUI, but it connected to internet. I"m using 192.168.43.xxx, I key in http://192.168.43.1 nothing come out.

image
image534×665 12.4 KB

image
image960×479 16.3 KB

I managed to go in into LUCI, but i can’t perform reboot

image
image969×332 30.9 KB

PLEASE HELP! I try run uboot again but can’t! What should I do!?

4

Here is how to flash firmware by uboot.
To flash uboot, the difference is to access the http://192.168.1.1/uboot.html page and upload the uboot binary.
Make sure to compare the md5sum value(see filename) of the downloaded uboot binary for integrity.

5

Hi all, i still having this issue. When the power tripped my Flint router didn’t manage to connect internet.

6

Please ssh into flint and use this command to verify the uboot version:

strings /dev/mtd7 |grep "U-Boot 2"