Flint GL-AX1800 - WAN6 gets all conf from DHCPv6 a part from IPv6 address

Router
20

@piennepi

I will try to support you:

  1. attach the flint WAN port to the SKY ONT
  2. boot up the flint and initialize it (navigating to 192.168.8.1 should be enough)
  3. ssh your flint from a computer connected to one of the flint LAN ports with something like ssh root@192.168.8.1
  4. install the map_4-13 package (pay attention to not install the map-t package) with something like opkg install map (@hansome the package is now online isn’t it?)
  5. amend your /etc/config/network as follows
...
config interface 'wan'
        option proto 'dhcp'
        option ifname 'eth0.101'
        option ipv6 '1'
        option metric '10'

config interface 'wan6'
        option proto 'dhcpv6'
        option disabled '0'
        option ifname 'eth0.101'
...
  1. run the /etc/init.d/network restart command
  2. wait at least 30 minutes SKY needs to understand you are changing router and release a new DHCP lease

That should work.