My memory usage after reboot is 66%. What server did you turn on?
I only use adguardhome, i don’t install any addon.
Today i disconnected my flint because memory leak and reboot problem and waiting for new firmware.
Hi cafebug:
Could you help me check some information?
Login via ssh ，then exec the following：
pid=$(pidof AdGuardHome);cat /proc/$pid/status
Then send me the screenshot.
Thanks!
actually, I never have AdGuardHome turned on, so your command doesn’t work. 
Same problem for me. Memory at 96% but with adguard on
Yes, the memory leaking problem is pita.
Can you ssh to the router and use the following command to see if the RAM will drop?
echo '3' > /proc/sys/vm/drop_caches
Pls let me know the result.
1 Like
Let me try it and report back …
Before & After Command: (It works ) (78% —> 62% ) 
OK. Thanks very much.
Seems we identified the problem. Pls wait for the new firmware. Compiling asap.
3 Likes
Hi morcheba:
Memory is increased as the system runs. But will be freed when the system needs to use memory.
same issue . crashing or rebooing after 30 mins
What is the firmware version?
Please update latest firmware: GL.iNet download center
Then open ‘enable crash log’
i found my problem . whene DLNA or file sharing is ON my router memory going to 95% or higher . i most disable DLNA and file sharing for fix my issue
1 Like
sry i asking on old thread. is this problem already fixed?
im on 3.214 my memory usage always 96%
i run your command and become 69%. is i need to execute this command regulary? is there negative effect?
im using adguard home too.
thanks
No negative effect. Can you try firmware 4.1?
got it. for now i stick with your script if the memory growing abnormaly again.
for the 4.xx fw will try the next weekend. thanks