I received my Mango yesterday, it was loaded with firmware V3.025. Upgrade page suggested upgrade to version V3.102 but auto and manual upgrades were not working. I upgraded firmware from LuCI interface (Advanced settings/firmware update).
I have just basic configuration, WiFi AP with LAN and WAN interfaces and I see these issues in V3.102:
-
I cannot configure country to enable WiFi channels 12 & 13. Default Mango setting offers only WiFi channels 1-11. I am in EU and I can use channels 12&13 in my country. Country setting is missing in GUI. Missing channels 12&13 means that I cannot connect to some APs those are configured at channel 12 or 13…
-
LuCI doesn’t have page to configure WiFi! I assume it should be under Interfaces but it is not there (only WAN, WAN6, LAN, GUEST). This URL link ends with error 404: http://192.168.8.1/cgi-bin/luci/admin/network/wireless/mt7628.network1 (this is url link from status page where router SSID is visible)
-
LuCI status page doesn’t describe WiFi status correctly, it shows that type is 802.11bg (should be 802.11bgn), there is no channel, and associated clients are not listed. http://192.168.8.1/cgi-bin/luci/admin/status/overview