I don’t have problems with the icon on AR750S Slate and AR750 Creta, I feel sorry for you.
1 Like
Sorry for the heads up about this but adding a field to type in the tailscale control server would be something very easy to implement, as of today I have to use headscale + goodcloud and is something ridiculous in my opinion
Please consider a function to monitor WAN link data usage, and provide a way to set/monitor/reset/block data usage to avoid data cap overages.
The feature has been detailed here:
3 Likes
+1 for this feature request!
Please why not add feature to obfuscate openVPN/wireguard somehow.
if there were a way to put cellular routers into “ip pass through” mode it would be awesome
see here
This is very interesting!
I have the Sonoff NSPANEL PRO and it has so many issues that I’m thinking to throw it away.
1 Like
obfs4proxy: Yawning Angel / obfs4 · GitLab
Edit: people have actually attempted this (using it with a VPN) and I think there are some guides out there.
It needs to be installed in both server and client.
I think GL should have it’s own VPN servers, it’s going to be easier for us and also GL can make money, most of your products are for travelers who need VPN, so why not run the service too.
@alzhao
I would like a Flow page so we can see where devices are sending traffic too. This is a critical missing piece for this router.
Can DEV please use Netify (the new v4 has packets sent/recv) agent to gather SNI, IP, Port and save the data to a database on the SD/USB drive, then display it in a UI, similar to how Firewalla does it?
5 Likes
Correct. I run my own Wireguard endpoints, so I would be installing it there 
I could swear I read an article recently about some small VPN provider testing obfs4proxy though…
All I want is working Upnp like we have on firmware 3.x. After that upnp does not works behind NAT, so iI use X-WRT firmware since it has a patch to get upnp working again.
Full cone nat will be good too.
1 Like
Feature Request
Please add a network mode for a Wi-Fi bridge. It would be helpful to be able to directly connect a Wi-Fi network to a remote wired network without the firewall.
3 Likes
Full Cone NAT has been added to the 4.5 firmware.
5 Likes
+1 for a working UPNP, it will be great for gaming and torrent
2 Likes
If I understand your WiFi Bridge network mode feature request correctly, you should be able to use Extender network mode and just disable the router’s WLAN, so only the LAN ports are enabled.
Correct. Unfortunately in the extend mode it appears to only use the 2.4ghz for the connection, saving the 5ghz for clients. If you could choose which band makes the connection, that would work too but might be potentially confusing.
This is a real bummer since there is no option for the device to automatically turn off when in idle. So if this is connected to a vehicle, once the vehicle shuts off you have to manually turn off the device. NO OTHER hotspot does this! They all turn off automatically when on battery, or in the case where they have no battery, obviously turn off on their own when the charging cable is removed. This should be a standard.