The ser2net and luci-app-ser2net packages are not available

[Sergio]

I have several GL-iNet routers, and I’ve managed to install these packages on a Flint 2 (MT 6000), but they aren’t available on a Flint (AX1800). The AX 1800 is running the latest stable version (4.8.3). I’m planning to set up a Sonoff ZBDongle-E v2.

On the Flint 2 (v4.8.4), the packages needed to configure the Sonoff (ser2net, luci-app-ser2net, kmod-usb-serial-cp210x) were available. Everything has been configured correctly.

Is there any way to obtain those missing packages for the Flint AX 1800?

Best regards and many thanks

[will.qiu]

Hi

It appears that the AX1800 already includes kmod-usb-serial-cp210x.

We’ll have our R&D team check whether we can add other packages to the repository.

You may want to try following the guide below to download and install these packages from the official OpenWRT repository.

How to change the AX1800/AXT1800 plug-in feed to OpenWRT

Applicable model: AX1800 (Flint 1), AXT1800 (Slate AX) GL Firmware: v4.8.x, op 23.05, aarch_cortex-a53-vfpv4 Needs, Application, Scenario: The AX1800/AXT1800 feed is GL repo by default in GL firmware. How do we switch to OpenWRT feed to get more plugins? Probably have questions about the software architecture of AX1800/AXT1800. Why cannot we find the corresponding architecture aarch_cortex-a53-vfpv4 to match in the OpenWRT repo? [Software architecture of firmware v4.8.x for AX1800/AXT1…

[Sergio]

Thank you very much. I’ll wait and see if it ends up in the official GL-iNet repository.
Best regards

[will.qiu]

Please try downloading them from the link below and uploading it to the router for installation.

ax1800-ser2net

We will upload them to the repository later.

[Sergio]

Thank you very much. It has been successfully installed from the repository.
Best regards