X3000 Critical Uboot Update

[Firesign]

Is this the github bin file (627kb) that I should use for the update?

uboot-x3000-20250225-md5-c9d7b2fd2451adbc0bb126e2d9729e87

Have other X3000 users used this file with success or have you had issues?

Does matter which port I use on the router?

Appreciate your time in responding.

[Firesign]

GL-iNet - Can you answer this please ^^^^
Thank you.

[meerkat]

Both GL-iNet and users are covering the topics here you should look or ask this questions.

Critical Problem Notification for GL-MT2500/GL-X3000/GL-XE3000

Dear GL.iNet Customers, This announcement addresses the startup failure and firmware recovery issues via U-Boot on the GL-MT2500/GL-X3000/GL-XE3000 devices. The problem stemmed from a software defect where some parameters were incorrectly defined, causing the routers to operate abnormally. As a result, we assessed that this issue might reduce the routers' service life to some extent, for which we sincerely apologize. We strongly recommend that all customers using these products, including GL-M…

[waffle]

I did the update yesterday with that same bin file and it went smoothly. I used the LAN port. It was quick and drama-free.

[Firesign]

Waffle,
Thank you, that's just what I needed.