Guest Network on physical LAN port plus WIFI (Slate AX, GL-AXT1800)

[chanzui]

Hi,

I would like to add pyhiscal LAN2 port to the guest network:
Guest Network = LAN2 + Guest WIFI.

I think, I need to “move” eth1 from br-lan to br-guest.
May I ask to help me here, please?

There is similar topic for the GL-B1300, but I think i canot copy past the solution to the GL-AXT1800:

GL-B1300 Physical Ethernet Port Guest LAN

Hi all, The GL-B1300 has two physical ethernet ports. Is it possible to have the 1st ethernet port on LAN and the 2nd ethernet port on Guest Network? Thank you!

[yuxin.zou]

Please refer to

AX-1800 - Luci - br-guest does not appear in devices list

If you want to use both the network port and Wi-Fi on the guest network, then you follow these steps. create a bridge device named br-guest and add eth3 to the bridge ports delete eht3 from br-lan Edit the Guest interface, remove the bridge configuration, and check br-guest in the device options Find the guest Wi-Fi in Network/Wireless and turn off the Isolate Clients option The /etc/config/network configuration file should like: [image] result: [image] [image]

[chanzui]

Thanks for pointing me into the right direction.

I did the changes directly in the config file and not in the web frontend(s):
/etc/config/network

I moved the line with list ports 'eth1'
from the section config device option name 'br-lan'
to the section config interface 'guest'

Looks like this now:

[deva2253]

Hello,
from the glinet web ui this settings is not avaiable?

[admon]

No, the GL Web GUI is pretty limited.

[deva2253]

I hope the can implement this useful feature soon.